Estimate shipping:
* Country: | |
* Region / State: | |
* Post Code: |
Xilinx Spartan-3 XMF3 FPGA module is designed for rapid prototyping and implementing FPGA projects. Module can be used for educational purposes. Module can work independently, or as control module in the bigger design.
Features
1) Xilinx XC3S200 FT256 FPGA
• 200,000-gates (4,320 Logic Cells)
• 12x 18x18 hardware multipliers
• 12x 18K-bits block RAMs (216K)
• 4 Digital Clock Managers
• 173 User I/O (99 routed on this board)
2) Xilinx XCF02S VO20C Flash
• 2 Mbit Platform Flash PROM
• IEEE Standard 1149.1/1532 Boundary-Scan (JTAG) support for programming
• Endurance of 20000 Program/Erase Cycles
3) Onboard IO peripherals
• 62.5MHz CMOS oscillator
• Four IO LEDs
• Two IO push buttons
4) Handy configuration
• JTAG header connected to JTAG chain
• Mode select jumper (JTAG or FLASH)
• Push button for manual initiation of configuration process
• Reset supervision by voltage monitor
• DONE LED
5) Onboard power supply
• 3.3V (IO, PERIPHERALS)
• 2.5V (VCCAUX, JTAG)
• 1.2V (CORE VOLTAGE)
• Input voltage range 4.5V – 15V (5V recommended)
• Power-ON LED
6) 90 independent I/O routed to the connectors
• 4x 19 pin line male connectors (18 IO + 1 power)
• One 20-pin connector (18 IO + 2 power)
• 2.54mm pitch for all connectors
• Small 50x50mm PCB designed to fit on the prototyping board with 2.54mm pitch
Documentation:
FPGA / CPLD | |
Equivalent Logic Cells | 4320 |
System Gates | 200000 |
Block RAM Bits | 216K |
Digital Clock Managers | 4 |
Development board | |
Crystal oscillator | 62.5Mhz CMOS |
IO LEDs | 4 |
IO push buttons | 2 |
IO routed to connectors | 90 |
FLASH | |
Flash size | 2 Mbit |
Flash type | Platform Flash |