Estimate shipping:
* Country: | |
* Region / State: | |
* Post Code: |
ALTERA MAX-II AM3C2 CPLD module is a low cost and easy to use tool. Designed for rapid prototyping and implementing CPLD designs. This module can be used independently, for education, or can be used as core module, for a bigger design.
Features
1) ALTERA EPM1270 F256 I5 CPLD
• 1270 LEs (570 to 1270 Equivalent macrocell range)
• Instant-on, non-volatile architecture
• Provides four global clocks with two clocks available per logic array block (LAB)
• UFM block up to 8 Kbits for non-volatile storage
• Bus-friendly architecture including programmable slew rate, drive strength, bus-hold, and programmable pull-up resistors
• Supports hot-socketing
• 304 MHz fCNT
2) Onboard IO peripherals
• 4 LEDs
• 2 push buttons
• 50 MHz CMOS crystal oscillator
3) Handy configuration
• Onboard JTAG header
4) Onboard power supply
• Input voltage range 5V – 15V
• 3.3V LDO
• POWER-ON LED
• J2 jumper to use external I/O voltage 1.5V-3.3V
5) 72 independent I/O routed to the connectors
• Four 1x19 male connectors (18 IO, 1 VCC or 1 GND)
• 2.54mm pitch for all connectors
• 1.5V-3.3V External I/O voltage can be used
• Small 50x50mm PCB designed to fit on the prototyping board with 2.54mm pitch
FPGA / CPLD | |
Equivalent Logic Cells | 1270 |
Development board | |
IO LEDs | 4 |
IO push buttons | 2 |
IO routed to connectors | 72 |