XKF3 XILINX FPGA KIT

XKF3 XILINX FPGA KIT
XKF3 XILINX FPGA KIT XKF3 XILINX FPGA KIT XKF3 XILINX FPGA KIT XKF3 XILINX FPGA KIT XKF3 XILINX FPGA KIT XKF3 XILINX FPGA KIT XKF3 XILINX FPGA KIT XKF3 XILINX FPGA KIT XKF3 XILINX FPGA KIT XKF3 XILINX FPGA KIT XKF3 XILINX FPGA KIT XKF3 XILINX FPGA KIT
Brand: PLDkit
Product Code: XKF3
Availability: Out Of Stock
Out Of Stock      - OR -   Add to Wish List
Add to Compare

Estimate shipping:

* Country:
* Region / State:
* Post Code:

Xilinx SPARTAN-3 XKF3 FPGA development kit is designed to study FPGA programming, or develop FPGA based projects. Also, it can be used as main control block in your machine. It includes many onboard peripherals to serve these needs. This kit doesn’t require special programming cable. Onboard USB controller allows JTAG programming and UART communication. When needed, it can be used as USB programmer, for programming any other external JTAG device, not necessarily XILINX. Documentation includes easy, step by step instructions, and demo projects, for complete beginners. This kit has Li-ion battery, what can be charged from USB port or from any micro-USB wall charger.


Features


1)    XILINX XC3S200 FT256 4C FPGA

•    200000 gates (4320 Logic Cells)
•    173 User I/O (127 routed on this board)
•    12x 18x18 hardware multipliers 
•    12x 18K-bits block RAMs (216K) 
•    4 Digital Clock Managers 
•    Fully supported by latest XILINX design tools


2)    XILINX XCF01S VO20C FLASH

•    1 Mbit Platform Flash PROM
•    IEEE Standard 1149.1/1532 Boundary-Scan (JTAG) support for programming
•    Endurance of 20000 Program/Erase Cycles
•    Fully supported by latest XILINX design tools


3)    FTDI FT2232D USB controller

•    USB to JTAG port A
•    USB to UART port B
•    Buffered port for programming external JTAG devices. Vref 1.65V -5.5V


4)    Onboard IO peripherals

•    4 LEDs
•    4 DIP switches
•    Speaker
•    50 MHz CMOS crystal oscillator
•    VGA port
•    16x2 Character LCD (HD44780, or functionally equal graphics controller)
•    Rotary Encoder
•    5x7 LED Matrix
•    4 optocoupled IO inputs (Full isolation mode, common GND mode, common VCC mode)
•    4 optocoupled IO outputs (Full isolation)
•    AT24C256 256Kbit EEPROM
•    LM75 Temperature sensor
•    PCF8563 Real time clock
•    ULN2003 Transistor array
•    64Mbit SDRAM


5)    Handy configuration

•    Configuration from onboard USB programmer
•    Configuration from external programmer
•    Mode select jumper (JTAG or FLASH)
•    DONE LED
•    Reset push button


6)    Onboard power management

•    Standard micro USB connector
•    High capacity Li-ion battery
•    Onboard charger with status LED, supports USB charging
•    5V (USB controller)
•    3.3V (IO, PERIPHERALS)
•    2.5V (VCCAUX, IO)
•    1.2V (CORE VOLTAGE)
•    POWER-ON LED
•    Power switch
•    Standby voltage for RTC
•    Reset supervision
•    Jumper for selecting BANK4, BANK5 voltage


7)    34 independent I/O routed to the connectors, 7 high load IO outputs, i2c header

•    One 2x12 male connector (22 IO, 1 GND, 1 VCC 3.3V or 2.5V)
•    One 2x6 female connector (8 IO, 2 VCC 3.3V, 2 GND)
•    One 1x6 female connector (4 IO, 1 VCC 3.3V, 1 GND)
•    One 1x8 male connector (7 high load IO, 1 VCC)
•    Max 50V AUX voltage and 500mA per output for high load IO
•    Peripheral modules support
•    2.54mm pitch for all connectors
•    One 1x4 male connector, i2c bus header (GND, VCC 3.3V, SCL, SDA)


8)    Small 100x100mm PCB

Documentation

Package includes:
1x XKF3 FPGA kit
​1x Micro USB cable
​1x Li-ion battery
FPGA / CPLD
Equivalent Logic Cells 4320
System Gates 200000
Block RAM Bits 216k
Digital Clock Managers 4
Development board
Crystal oscillator 50 MHz CMOS
EEPROM size 256Kbit
IO LEDs 4
IO routed to connectors 34+7+2
FLASH
Flash size 1 Mbit
Flash type XILINX Platform Flash PROM

PLDkit OÜ © 2024