XMFU XILINX Kintex UltraScale FPGA MODULE

XILINX Kintex UltraScale XMFU FPGA module is a powerful and easy to use tool. Designed for rapid prototyping and implementing FPGA designs. Board can be used for educational purposes. It can work independently, or can be used as control module in the bigger design.

1) XILINX XCKU040 FPGA 

• 530250 Logic Cells

• 1920 DSP Slices

• 21.1Mb Block RAM

• 10 Clock Management Tiles

• 540 User I/O (91 routed on this board)

2) INTEL JS28F256P30TF FLASH

• 256Mbit

• BPI Interface

• FPGA configuration

• 100,000 erase cycles per block

3) Onboard IO peripherals

• 1024 Kbit EEPROM

• CH340G USB UART port

• 50MHz CMOS oscillator

• 4 LEDs

• 1 push button

4) Handy configuration

• Standard 2.54mm JTAG header

• Mode select jumpers

• DONE LED

• Push button for manual initiation of configuration process

• Header for external reset

• Reset supervision by voltage monitor

5) Onboard power supply

• 3.3V 0.8A (CONFIGURATION)

• 1.8V 4A (IO)

• 0.95V 4A (CORE VOLTAGE)

• Input voltage range 6V – 15V

• POWER-GOOD LED

6) 91 independent I/O routed to the connector

• J9 3x29 male pin connector (81 IO, 3 VCC, 3 GND)

• 2.54mm pitch

• 1.8V I/O voltage

• Small 74x75mm PCB

 

XMFU-40 Rev. A

 

Tags: XMFU, XILINX, Kintex, UltraScale, FPGA, MODULE