XM2F3 XILINX FPGA MODULE

Xilinx Spartan-3 XM2F3 FPGA module is designed for rapid prototyping and implementing FPGA projects. Module can be used for educational purposes. Module can work independently, or as control module in the bigger design.

Features

1) Xilinx XC3S200 FT256 FPGA

• 200,000-gates (4,320 Logic Cells)
• 12x 18x18 hardware multipliers
• 12x 18K-bits block RAMs (216K)
• 4 Digital Clock Managers
• 173 User I/O (49 routed on this board)

2) Xilinx XCF02S VO20C Flash

• 2 Mbit Platform Flash PROM
• IEEE Standard 1149.1/1532 Boundary-Scan (JTAG) support for programming
• Endurance of 20000 Program/Erase Cycles

3) Onboard IO peripherals

• 62.5MHz CMOS oscillator
• Two IO LEDs

4) Handy configuration

• JTAG header connected to JTAG chain
• Mode select jumper (JTAG or FLASH)
• Push button for manual initiation of configuration process
• Reset supervision by voltage monitor
• DONE LED

5) Onboard power supply

• 3.3V (IO, PERIPHERALS)
• 2.5V (VCCAUX, JTAG)
• 1.2V (CORE VOLTAGE)
• Input voltage range 5V – 15V
• Power-ON LED

6) 44 independent I/O routed to the connectors

• Two 19 pin male connectors (18 IO + 1 power)
• One 10 pin connector (8 IO + 2 power)
• 2.54mm pitch for all connectors
• Small 50x50mm PCB with M3 mounting holes

Documentation:

​​XM2F3-200-2 62.5M Rev. B