FTDI FT2232D MODULE

FTDI FT2232D MODULE
FTDI FT2232D MODULE FTDI FT2232D MODULE FTDI FT2232D MODULE FTDI FT2232D MODULE FTDI FT2232D MODULE
Brand: PLDkit
Product Code: FT2232D MODULE
Availability: 19
Price:26.00€
Qty:    - OR -   Add to Wish List
Add to Compare

Estimate shipping:

* Country:
* Region / State:
* Post Code:
FT2232D MODULE is easy to use developer’s board. 
It is designed to help study FTDI’s FT2232D chip programming. 
It can be used as USB to UART/I2C/SPI/JTAG serial converter.
 
Features
* Single chip USB <=> dual channel serial/parallel ports with a variety of configurations
* Entire USB protocol handled on the chip: no USB-specific firmware programming required
* FT232B-style UART interface option with full handshaking & modem interface signals
* UART interface supports 7/8 data bits, 1/2 stop bits and Odd/Even/Mark/Space/No Parity
* Data transfer rate of 300 Baud => 1M Baud (RS232)
* Data transfer rate of 300 Baud => 3M Baud (TTL and RS422/RS485)
* Auto transmit enable control for RS485 serial applications using TXDEN pin
* In-built support for event characters and line break condition
* Transmit and receive LED drive signals on each channel
* FT245B-style FIFO interface option with bi-directional data bus and simple 4-wire handshaking interface
* Data transfer rate up to 1M Byte/second (Parallel FIFO)
* Enhanced Bit-Bang Mode interface option with RD# and WR# strobes
* New Synchronous Bit-Bang Mode interface option
* New Multi-Protocol Synchronous Serial Engine (MPSSE) interface option
* New CPU-style FIFO interface mode option (FT2232D only)
* New MCU Host Bus Emulation Mode option
* New Fast Opto-Isolated Serial Interface Mode option
* High I/O pin output drive option
* Interface mode and USB description strings configurable in external EEPROM
* EEPROM configurable on-board via USB
* Support for USB suspend and resume conditions via PWREN# and SI/WU pins
* Support for bus powered and high-power bus powered USB configurations
* Integrated Power-On-Reset circuit with optional reset input and reset output pins
* 5V and 3.3V logic IO interfacing with independent level conversion on each channel
* Integrated 3.3V LDO regulator for USB IO
* Integrated 6MHz - 48Mhz clock multiplier PLL
* USB Bulk data transfer modes
* 4.35V to 5.25V single supply operating voltage range
* Low operating and USB suspend current
* UHCI/OHCI/EHCI host controller compatible
* USB 2.0 Full Speed (12M bits/second) compatible
* Extended -40°C to 85°C industrial operating temperature range (FT2232D only)
* Compact 48-LD lead free LQFP package (RoHS compliant)
* FTDI’s royalty-free VCP and D2XX drivers eliminate the requirement for USB driver development in most cases
* Dedicated Windows DLLs available for USB to JTAG, USB to SPI and USB to I2C applications
 
Documentation:
FT2232D MODULE Rev.B
 
Previous versions

 

FT2232D MODULE Rev.A

 
Package includes:
1x FT2232D MODULE

PLDkit OÜ © 2020