Estimate shipping:
* Country: | |
* Region / State: | |
* Post Code: |
ALTERA MAX-II AM3C2 CPLD module is a low-cost and easy-to-use tool. Designed for rapid prototyping and implementing CPLD designs. This module can be used independently, for education, or can be used as a core module, for a bigger design.
Features
1) ALTERA EPM1270 F256 CPLD
• 1270 LEs (570 to 1270 Equivalent macrocell range)
• Instant-on, non-volatile architecture
• Provides four global clocks with two clocks available per logic array block (LAB)
• UFM block up to 8 Kbits for non-volatile storage
• Bus-friendly architecture including programmable slew rate, drive strength, bus-hold, and programmable pull-up resistors
• Supports hot-socketing
• 304 MHz fCNT
2) Onboard IO peripherals
• 4 LEDs
• 2 push buttons
• 50 MHz CMOS crystal oscillator
3) Handy configuration
• Onboard JTAG header
4) Onboard power supply
• Input voltage range 5V – 15V
• 3.3V LDO
• POWER-ON LED
• J2 jumper to use external I/O voltage 1.5V-3.3V
5) 72 independent I/O routed to the connectors
• Four 1x19 male connectors (18 IO, 1 VCC or 1 GND)
• 2.54mm pitch for all connectors
• 1.5V-3.3V External I/O voltage can be used
• Small 50x50mm PCB designed to fit on the prototyping board with 2.54mm pitch
FPGA / CPLD | |
Equivalent Logic Cells | 1270 |
Development board | |
IO LEDs | 4 |
IO push buttons | 2 |
IO routed to connectors | 72 |